diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile
new file mode 100644
index 0000000..267400b
--- /dev/null
+++ b/board/freescale/bsc9132qds/Makefile
@@ -0,0 +1,52 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
new file mode 100644
index 0000000..4a3dbfe
--- /dev/null
+++ b/board/freescale/bsc9132qds/README
@@ -0,0 +1,150 @@
+Overview
+--------
+ The BSC9132 is a highly integrated device that targets the evolving
+ Microcell, Picocell, and Enterprise-Femto base station market subsegments.
+
+ The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
+ core technologies with MAPLE-B2P baseband acceleration processing elements
+ to address the need for a high performance, low cost, integrated solution
+ that handles all required processing layers without the need for an
+ external device except for an RF transceiver or, in a Micro base station
+ configuration, a host device that handles the L3/L4 and handover between
+ sectors.
+
+ The BSC9132 SoC includes the following function and features:
+    - Power Architecture subsystem including two e500 processors with
+	512-Kbyte shared L2 cache
+    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
+	cache
+    - 32 Kbyte of shared M3 memory
+    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
+      Processing (MAPLE-B2P)
+    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
+      ECC), up to 1333 MHz data rate
+    - Dedicated security engine featuring trusted boot
+    - Two DMA controllers
+         - OCNDMA with four bidirectional channels
+         - SysDMA with sixteen bidirectional channels
+    - Interfaces
+        - Four-lane SerDes PHY
+	    - PCI Express controller complies with the PEX Specification-Rev 2.0
+        - Two Common Public Radio Interface (CPRI) controller lanes
+	    - High-speed USB 2.0 host and device controller with ULPI interface
+        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
+	    - Antenna interface controller (AIC), supporting four industry
+		standard JESD207/four custom ADI RF interfaces
+       - ADI lanes support both full duplex FDD support & half duplex TDD
+       - Universal Subscriber Identity Module (USIM) interface that
+	   facilitates communication to SIM cards or Eurochip pre-paid phone
+	   cards
+       - Two DUART, two eSPI, and two I2C controllers
+       - Integrated Flash memory controller (IFC)
+       - GPIO
+     - Sixteen 32-bit timers
+
+The SC3850 core subsystem consists of the following:
+ - 32 KB, 8-way, level 1 instruction cache (L1 ICache)
+ - 32 KB, 8-way, level 1 data cache (L1 DCache)
+ - 512 KB, 8-way, level 2 unified instruction/data cache (L2 cache/M2 memory)
+ - Memory management unit (MMU)
+ - Global interrupt controller ( GIC)
+ - Debug and profiling unit (DPU)
+ - Two 32-bit quad timers
+
+BSC9132QDS board Overview
+-------------------------
+ 2Gbyte DDR3 (on board DDR), Dual Ranki
+ 32Mbyte 16bit NOR flash
+ 128Mbyte 2K page size NAND Flash
+ 256 Kbit M24256 I2C EEPROM
+ 128 Mbit SPI Flash memory
+ SD slot
+ USB-ULPI
+ eTSEC1: Connected to SGMII PHY
+ eTSEC2: Connected to SGMII PHY
+ PCIe
+ CPRI
+ SerDes
+ I2C RTC
+ DUART interface: supports one UARTs up to 115200 bps for console display
+
+Frequency Combinations Supported
+--------------------------------
+Core MHz/CCB MHz/DDR(MT/s)
+1. CPU0/CPU1/CCB/DDR: 1000MHz/1000MHz/500MHz/800MHz
+     (SYSCLK = 100MHz, DDRCLK = 100MHz)
+2. CPU0/CPU1/CCB/DDR: 1200MHz/1200MHz/600MHz/1330MHz
+     (SYSCLK = 100MHz, DDRCLK = 133MHz)
+
+Boot Methods Supported
+-----------------------
+1. NOR Flash
+2. NAND Flash
+3. SD Card
+4. SPI flash
+
+Default Boot Method
+--------------------
+NOR boot
+
+Building U-boot
+--------------
+To build the u-boot for BSC9132QDS:
+1. NOR Flash
+	make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK
+2. NAND Flash : It is currently not supported
+3. SPI Flash
+	make BSC9132QDS_SPIFLASH_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_SPIFLASH_DDRCLK133 : For 133MHZ DDR CLK
+4. SD Card
+	make BSC9132QDS_SDCARD_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_SDCARD_DDRCLK133 : For 133MHZ DDR CLK
+
+Memory map
+-----------
+ 0x0000_0000	0x7FFF_FFFF	DDR			2G cacheable
+ 0x8000_0000	0x8FFF_FFFF	NOR Flash		256M
+ 0x9000_0000	0x9FFF_FFFF	PCIe Memory 		256M
+ 0xA000_0000	0xA7FF_FFFF	DSP core1 L2 space	128M
+ 0xB000_0000	0xB0FF_FFFF	DSP core0 M2 space	16M
+ 0xB100_0000	0xB1FF_FFFF	DSP core1 M2 space	16M
+ 0xC000_0000	0xC000_7FFF	M3 Memory		32K
+ 0xC001_0000	0xC001_FFFF	PCI Express I/O		64K
+ 0xC100_0000	0xC13F_FFFF	MAPLE-2F		4M
+ 0xC1F0_0000	0xC1F7_FFFF	PA SRAM Region 0	512K
+ 0xC1F8_0000	0xC1FB_FFFF	PA SRAM Region 1	512K
+ 0xFED0_0000	0xFED0_3FFF	SEC Secured RAM		16K
+ 0xFEE0_0000	0xFEE0_0FFF	DSP Boot ROM		4K
+ 0xFF60_0000	0xFF6F_FFFF 	DSP CCSR		1M
+ 0xFF70_0000	0xFF7F_FFFF	PA CCSR			1M
+ 0xFF80_0000	0xFFFF_FFFF	Boot Page & NAND Buffer 8M
+
+Flashing Images
+---------------
+To place a new u-boot image in the NAND flash and then boot
+with that new image temporarily, use this:
+	tftp 1000000 u-boot-nand.bin
+	nand erase 0 100000
+	nand write 1000000 0 100000
+	reset
+
+Using the Device Tree Source File
+---------------------------------
+To create the DTB (Device Tree Binary) image file,
+use a command similar to this:
+
+	dtc -b 0 -f -I dts -O dtb bsc9132qds.dts > bsc9132qds.dtb
+
+Likely, that .dts file will come from here;
+
+	linux-2.6/arch/powerpc/boot/dts/bsc9132qds.dts
+
+Booting Linux
+-------------
+Place a linux uImage in the TFTP disk area.
+
+	tftp 1000000 uImage
+	tftp 2000000 rootfs.ext2.gz.uboot
+	tftp c00000 bsc9132qds.dtb
+	bootm 1000000 2000000 c00000
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
new file mode 100644
index 0000000..bcac5c1
--- /dev/null
+++ b/board/freescale/bsc9132qds/bsc9132qds.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <asm/fsl_ifc.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#ifdef CONFIG_PCI
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#endif
+
+#include "../common/qixis.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+
+int board_early_init_f(void)
+{
+	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+
+	return 0;
+}
+
+void board_config_serdes_mux(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+
+	switch (srds_cfg) {
+	/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
+	case  1:
+	case  2:
+	case  3:
+	case  4:
+	case  5:
+	case 22:
+	case 23:
+	case 24:
+	case 25:
+	case 26:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x03);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 CPRI 1 */
+	case  6:
+	case  7:
+	case  8:
+	case  9:
+	case 10:
+	case 27:
+	case 28:
+	case 29:
+	case 30:
+	case 31:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x01);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 SGMII2 */
+	case 11:
+	case 32:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x00);
+		break;
+
+	/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+	case 33:
+	case 34:
+	case 35:
+	case 36:
+	case 37:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x07);
+		break;
+
+	/* PEX(1) SGMII2 SGMII1 CPRI 1 */
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 38:
+	case 39:
+	case 40:
+	case 41:
+	case 42:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x05);
+		break;
+
+	/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
+	case 43:
+	case 44:
+	case 45:
+	case 46:
+	case 47:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
+		break;
+
+
+	default:
+		break;
+	}
+}
+
+int board_early_init_r(void)
+{
+#ifndef CONFIG_SYS_NO_FLASH
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_64M, 1);
+
+	set_tlb(1, flashbase + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
+#endif
+	board_config_serdes_mux();
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int checkboard(void)
+{
+	struct cpu_type *cpu;
+	u8 sw;
+
+	cpu = gd->cpu;
+	printf("Board: %sQDS\n", cpu->name);
+
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
+	QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	printf("IFC chip select:");
+	switch (sw) {
+	case 0:
+		printf("NOR\n");
+		break;
+	case 2:
+		printf("Promjet\n");
+		break;
+	case 4:
+		printf("NAND\n");
+		break;
+	default:
+		printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct fsl_pq_mdio_info mdio_info;
+	struct tsec_info_struct tsec_info[4];
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+
+#endif
+
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	num++;
+#endif
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+	tsec_eth_init(bis, tsec_info, num);
+
+	#ifdef CONFIG_PCI
+	pci_eth_init(bis);
+	#endif
+
+	return 0;
+}
+#endif
+
+#define USBMUX_SEL_MASK		0xc0
+#define USBMUX_SEL_UART2	0xc0
+#define USBMUX_SEL_USB		0x40
+#define SPIMUX_SEL_UART3	0x80
+#define GPS_MUX_SEL_GPS		0x40
+
+#define TSEC_1588_CLKIN_MASK	0x03
+#define CON_XCVR_REF_CLK	0x00
+
+int misc_init_r(void)
+{
+	u8 val;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	/*Configure 1588 clock-in source from RF Card*/
+	val = QIXIS_READ_I2C(brdcfg[5]);
+	QIXIS_WRITE_I2C(brdcfg[5],
+		(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
+
+	if (hwconfig("uart2") && hwconfig("usb1")) {
+		printf("UART2 and USB cannot work together on the board\n");
+		printf("Remove one from hwconfig and reset\n");
+	} else {
+		if (hwconfig("uart2")) {
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_USB_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
+		} else {
+			/* By default USB should be selected.
+			* Programming FPGA to select USB. */
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
+		}
+
+	}
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
+			clrbits_be32(&gur->pmuxcr,
+				MPC85xx_PMUXCR0_SIM_SEL_MASK);
+			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* UART3 and SPI1 (Flashes) are muxed together */
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_UART3_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
+
+			/* MUX to select UART3 connection to J24 header
+			 * or to GPS */
+			val = QIXIS_READ_I2C(brdcfg[6]);
+			if (hwconfig("gps"))
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val | GPS_MUX_SEL_GPS));
+			else
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val & ~(GPS_MUX_SEL_GPS)));
+		}
+	}
+	return 0;
+}
+
+void fdt_del_node_compat(void *blob, const char *compatible)
+{
+	int err;
+	int off = fdt_node_offset_by_compatible(blob, -1, compatible);
+	if (off < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+			compatible, fdt_strerror(off));
+		return;
+	}
+	err = fdt_del_node(blob, off);
+	if (err < 0) {
+		printf("WARNING: could not remove %s: %s.\n",
+			compatible, fdt_strerror(err));
+	}
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	#if defined(CONFIG_PCI)
+	FT_FSL_PCI_SETUP;
+	#endif
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	if (!(hwconfig("uart2") && hwconfig("usb1"))) {
+		/* If uart2 is there in hwconfig remove usb node from
+		 *  device tree */
+
+		if (hwconfig("uart2")) {
+			/* remove dts usb node */
+			fdt_del_node_compat(blob, "fsl-usb2-dr");
+		} else {
+			fdt_fixup_dr_usb(blob, bd);
+			fdt_del_node_and_alias(blob, "serial2");
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC)
+			/* Delete SPI node from the device tree */
+				fdt_del_node_and_alias(blob, "spi1");
+	} else
+		fdt_del_node_and_alias(blob, "serial3");
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			/* remove dts sdhc node */
+			fdt_del_node_compat(blob, "fsl,esdhc");
+		} else if (romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* remove dts sim node */
+			fdt_del_node_compat(blob, "fsl,sim-v1.0");
+			printf("SIM & SDHC can't work together on the board");
+			printf("\nRemove sim from hwconfig and reset\n");
+		}
+	}
+}
+#endif
diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c
new file mode 100644
index 0000000..946ad19
--- /dev/null
+++ b/board/freescale/bsc9132qds/ddr.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
+	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
+	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
+	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
+	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
+	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
+	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
+	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
+	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
+	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
+	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
+	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = {
+	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333,
+	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333,
+	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333,
+	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333,
+	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333,
+	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333,
+	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333,
+	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
+	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333,
+	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333,
+	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+	{750, 850, &ddr_cfg_regs_800},
+	{1060, 1333, &ddr_cfg_regs_1333},
+	{0, 0, NULL}
+};
+
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+phys_size_t fixed_sdram(void)
+{
+	int i;
+	char buf[32];
+	fsl_ddr_cfg_regs_t ddr_cfg_regs;
+	phys_size_t ddr_size;
+	ulong ddr_freq, ddr_freq_mhz;
+
+	ddr_freq = get_ddr_freq(0);
+	ddr_freq_mhz = ddr_freq / 1000000;
+
+	printf("Configuring DDR for %s MT/s data rate\n",
+				strmhz(buf, ddr_freq));
+
+	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
+		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
+		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
+			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
+							sizeof(ddr_cfg_regs));
+			break;
+		}
+	}
+
+	if (fixed_ddr_parm_0[i].max_freq == 0)
+		panic("Unsupported DDR data rate %s MT/s data rate\n",
+					strmhz(buf, ddr_freq));
+
+	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+
+	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
+					LAW_TRGT_IF_DDR_1) < 0) {
+		printf("ERROR setting Local Access Windows for DDR\n");
+		return 0;
+	}
+
+	return ddr_size;
+}
+
+#else /* CONFIG_SYS_DDR_RAW_TIMING */
+/* Micron MT41J512M8_187E */
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 1,
+	.rank_density = 1073741824u,
+	.capacity = 1073741824u,
+	.primary_sdram_width = 32,
+	.ec_sdram_width = 0,
+	.registered_dimm = 0,
+	.mirrored_dimm = 0,
+	.n_row_addr = 15,
+	.n_col_addr = 10,
+	.n_banks_per_sdram_device = 8,
+	.edc_config = 0,
+	.burst_lengths_bitmask = 0x0c,
+
+	.tCKmin_X_ps = 1870,
+	.caslat_X = 0x1e << 4,	/* 5,6,7,8 */
+	.tAA_ps = 13125,
+	.tWR_ps = 15000,
+	.tRCD_ps = 13125,
+	.tRRD_ps = 7500,
+	.tRP_ps = 13125,
+	.tRAS_ps = 37500,
+	.tRC_ps = 50625,
+	.tRFC_ps = 160000,
+	.tWTR_ps = 7500,
+	.tRTP_ps = 7500,
+	.refresh_rate_ps = 7800000,
+	.tFAW_ps = 37500,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+		unsigned int controller_number,
+		unsigned int dimm_number)
+{
+	const char dimm_model[] = "Fixed DDR on board";
+
+	if ((controller_number == 0) && (dimm_number == 0)) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	int i;
+	popts->clk_adjust = 6;
+	popts->cpo_override = 0x1f;
+	popts->write_data_delay = 2;
+	popts->half_strength_driver_enable = 1;
+	/* Write leveling override */
+	popts->wrlvl_en = 1;
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+	popts->wrlvl_start = 0x8;
+	popts->trwt_override = 1;
+	popts->trwt = 0;
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+	}
+}
+
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c
new file mode 100644
index 0000000..dc23658
--- /dev/null
+++ b/board/freescale/bsc9132qds/law.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SYS_NO_FLASH
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC),
+#endif
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+	SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
new file mode 100644
index 0000000..0e4545f
--- /dev/null
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_4K, 1),
+
+	/* *I*G* - CCSRBAR (PA) */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 1, BOOKE_PAGESZ_1M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+			0, 3, BOOKE_PAGESZ_64M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+			0, 4, BOOKE_PAGESZ_64M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT)
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 8, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCI
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 6, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 7, BOOKE_PAGESZ_64K, 1),
+#endif
+
+		/* *I*G - Board FPGA  */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 9, BOOKE_PAGESZ_256K, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 5, BOOKE_PAGESZ_1M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);